Clip for BRAAS concrete roof tiles made of profiled steel wire in the shape of a hook on one side, and on the other side terminated with a rectangular plate shaped to fit BRAAS concrete roof tiles.

Translation: "U" clip for concrete roof tiles

The "U" clip is the most commonly used clip for concrete roof tiles. It is suitable for mounting all models of cement tiles by inserting the sharp end into the roof structure and hooking the other end onto the edge of the tile. The additional zinc coating increases its resistance to adverse weather conditions.

Packaging: 100 pcs/box, 24 boxes/carton, 18 cartons/pallet.

Side clip "K" made of galvanized steel wire for mounting cement and ceramic roof tiles. It is mounted by inserting its sharp end into the roof structure and hooking the other profiled side onto the side lock of the roof tile. Available in packs of 100 pieces.

The "J" clip is designed for safe installation of ceramic roof tiles. It can be used for most models of ceramic roof tiles from various manufacturers and is the most popular clip for mounting ceramic roof tiles. It is designed for mounting on battens with a thickness of 40 mm ("40" type) or 50 mm ("50" type).

The clip is made of galvanized steel wire in the shape of the letter "J". It is mounted by hooking one side onto the side lock of the roof tile, or both the side and top locks, and the other side onto the batten.

The universal side clip is made of galvanized steel wire for mounting ceramic roof tiles. It can be used for most models of ceramic roof tiles from different manufacturers. The clip is attached to the side locks of the tiles that are placed directly on top of each other. Available lengths are 260, 280, 300, 320, and 340 [mm]. An additional galvanized coating increases the resistance to adverse weather conditions.

The clip is designed for fixing cut roof tiles in the valleys or corners of the roof. The clip's hook should be attached to the edge of the tile, and then the wire end should be fastened to the batten with a large-headed nail.

The ridge vent with grate is used to effectively prevent birds and other animals from getting under the roof covering and enables ventilation of the roof surface.

The holes in the supporting strip make it easy to attach with nails or screws. Spacer blocks allow for easy insertion of gutter hooks. It is made of 100% polypropylene.

Used as a sheet metal finish for the eaves part of the roof. Made of high-quality aluminum painted with polyester paint and protected with polyethylene film that is removed during the installation process.

It should be attached to the eaves board using large-headed nails. The profiled edge should be inserted into the gutter, and a membrane or foil should be applied to the strip, taking care to stretch the material properly.

The ridge vent is used to effectively prevent birds and other animals from getting under the roof covering and enables ventilation of the roof surface.

The holes in the supporting strip make it easy to attach with nails or screws. It is made of 100% polypropylene.

The grate is suitable for use with all types of roof coverings as a ventilation element at the eaves in sloping roofs. It provides effective protection against birds, rodents, and large insects getting under the roof covering. At the same time, it enables proper ventilation of the roof.